Nautik Magazine

What’s New | Longer length, room for one more passenger, and engines up to 200 cv: Meet the new Pacific Craft 640 Open

The new Pacific Craft 640 Open is 16 centimeters longer than the 625 Open, seats one more passenger, and can be equipped with exceptionally powerful engines.

Bird's-eye view of the Pacific Craft 640 Open, featuring a bow sundeck and center console. PHOTO: Yamaha

Pacific Craft takes its open-boat lineup a step further with the 640 Open, a 6.40-meter-long boat designed for everyday use at sea, with plenty of space to spend the day on board, go fishing, or anchor in a cove. Yamaha Motor Europe has unveiled the model with two engine options—the F150XC and F200XC outboard motors—and has put it to the test in the waters off Sitges.

Larger and with a higher load capacity

Compared to the 625 Open, the new boat is 160 mm longer overall (6,400 mm vs. 6,240 mm), although it retains the same hull length of 5,800 mm. The maximum beam is 2,500 mm (10 mm less than its sister model), and the transom is 125 mm longer.

Two crew members are sailing aboard the Yamaha-powered Pacific Craft 640 Open in the waters off the Mediterranean coast. PHOTO: Yamaha

The hull displacement increases to 896 kg (38 kg more), and the load capacity reaches 900 kg—50 kg more than on the 625 Open. The most noticeable change for users is the navigation category, which has been upgraded from C-7 to C-8, allowing the boat to carry eight people—one more than before.

The maximum power output is 200 cv, the same as on the 625 Open, although the recommended power output increases from 130 to 150 cv. The tanks retain their capacity: 120 liters of fuel and 54 liters of water.

Small in size, huge in performance

Standard features on the 640 Open include an anchor locker, self-draining deck, stainless steel railings, a bow storage locker, windshield grab handles, mechanical steering, LED navigation lights, a swim ladder, a stainless-steel pulpit and cleats, and fishing rod holders. It also features a sun deck, a bow table, a complete set of inflatable mats, and a choice of either a leaning post or seats.

The North Shore version adds Silvertex mats, a custom hull color, fender mounts, and a natural teak deck. Meanwhile, the Black Series trim package includes black-painted railings, cleats, and grab handles; a light gray hull; and Pacific Craft vinyl in a grayscale pattern, with an optional T-Top.

Optional features include a stainless-steel bimini (also painted black), swim platforms, a water ski pole, a shower system with a fresh-water tank, an electric windlass with its mount, closed-cell foam mats, and various covers made of Surlast and Sunbrella.

With the F150XC, the 640 Open goes from 33.88 knots at 20% load (180 kg) to 26.04 knots at full load (900 kg), according to the manufacturer’s estimates. With the F200XC, those figures range from 40.53 to 31.15 knots, and the estimated power curve peaks at 42.4 knots at 6,000 rpm.

The Experience of the Baptism in Sitges

The sea trial took place last Saturday, September 19, at 11:00 a.m., at Port d’Aiguadolç, using an F150XC and a Talon SDS propeller with a pitch of 17. On board were one person and 70 liters of fuel, with wind-driven waves of 0.5 m and a period of 3 seconds, and a wind speed of 5 knots.

Under these conditions, the boat begins to plane at 3,000 rpm, traveling at 14.1 knots. At 3,500 rpm, it reaches 20.3 knots with a fuel consumption of 19.5 l/h, and at 4,000 rpm, 24.4 knots with 25 l/h. At 5,500 rpm, it reaches 36.9 knots, with a fuel consumption of 59.8 l/h.